D Type High Speed Single Station Plastic Bottle Blow Molding Machine with IML for Plastic Motor Oil Bottle
SLD series:
1: this machine is suitable for the production of 200ML 10L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speedF aster, run more smoothly.automatic flying side device: in addition to the overflow device can accurately remove the product of the residual material, and with a straight push type in addition to the overflow device and a rotary knife type in addition to overflow device, the real realizationAutomatic equipment without manual operation.
2: die opening and closing system: specially designed for Heng lock mould mechanism using a high pressure mode locking, locking plate stress in the centre of the template, clamping force, openThe rigid lock template, even if the ultra wide die is also fitted.
3: die head system: all the use of 38CRMOALA and other materials, the precision machining and heat treatment.Equipped with Pre-clip Preform Device and Pre-seal Cutter.
4: hydraulic system: full hydraulic double proportional hydraulic control, equipped with imported famous brand hydraulic valve and oil pump, stable, reliable.
4.Full automatic: Push “ Full Automatic” key and then push “Reset” and the machine will reset. Select left rack or right rack or both of them, full automatic cycle will begin according to procedure selected. Once one cycle finishes, placing rack is automatically connected and next cycle begins. That is the full automatic way. If action does’t finish within set time, the machine will stop and alarm.
Notes: Before temperature of each stage/zone of material barrel reaches its set temperature of product moulding process, do not start extrusion machine. Otherwise, machine will be damaged.
| SPECIFICATION | SLD-75 |
| MATERIAL | | PE,PP,EVA,ABS,PS |
| MAX CONTAINER CAPACITY | L | 10 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6 |
| OUPUT(DRY CYCLE) | PC/HR | 600 |
| MACHINE DIMENSION (LxWxH ) | MM | 4300x2400x2200 |
| TOTAL WEIGHT | TON | 7.5T |
| CLAMPING UNIT | |
| CLAMPING FORCE | KN | 65 |
| PLATEN OPENING STROKE | MM | 220-530 |
| PLATEN SIZE(WxH) | MM | 320x350 |
| MAX MOULD SIZE(WxH) | MM | 400x350 |
| MOLD THICKNESS | MM | 225-320 |
| EXTRUDER UNIT | |
| SCREW DIAMETER | MM | 75 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 95 |
| BARREL HEATING POWER | KW | 20 |
| NUMBER OF HEATING ZONE | ZONE | 4 |
| EXTRUDER MOTOR RATED POWER | KW | 22 |
| DIE HEAD | |
| NUMBER OF DIE HEATING ZONE | ZONE | 2-5 |
| POWER OF DIE HEATING | KW | 8 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 130 |
| CENTER DISTANCE OF THREE DIE | MM | 110 |
| CENTER DISTANCE OF FOUR DIE | MM | 100 |
| CENTER DISTANCE OF SIX DIE | MM | 80 |
| MAX DIE-PIN DIAMETER | MM | 200 |
| POWER | |
| MAX DRIVE POWER | KW | 24 |
| TOTAL POWER | KW | 62 |
| FAN POWER OF SCREW | KW | 3.6 |
| AIR PRESSURE | MPA | 0.6 |
| AIR CONSUMPTION | M3/MIN | 0.5 |
| AVERAGE ENERGY CONSUMPTION | KW | 22 |
Product Tags:
|
|
600bph Blowing Machine For Plastic Bottle Images
|
